1 inch 24V DC Solenoid Valve Normally Closed (NC)

1 inch 24V AC/DC Solenoid Valve Normally Closed
Product Description:

UW series is direct diaphragm, multiplex, connected, conductive and normally
2/2-way closed (NC) solenoid valve.
Can operate directly under low pressure
Fluid type availability: water, air, light oil
Acceptable for Viton(130℃), Silicone(130℃) and EPDM(130℃) customization

Usage:

Water and low viscosity fluids.
Gases

Features:

Durable and practical.
Made of high quality plastic and metal, long life.
Very convenient to use, open or close when power on or off.

PRECAUTIONS:
. Before pipelining, the pipeline line should be very clean without any contaminants or anything else should not be existed.
. To extend the product life, Y-line filter should be installed in the front end of the solenoid valve.
. AC voltage tolerance: ± 10%; DC voltage tolerance: ± 1%
. It must be installed horizontally; vertical installation is not recommended.
Not Suitalbe for the fluid as below:
. Liquid state when at high temperature; solid status when cool.
. Corrosive fluid
. Viscosity greater than 20cst