This is a MPU-6500 based IMU sensor breakout. The board breakouts the I2C and SPI port for communication.
The MPU-6500 is a 6-axis MotionTracking device that combines a 3-axis gyroscope, 3-axis accelerometer, and a Digital Motion Processor™ (DMP) all in a small 3x3x0.9mm package. It also features a 4096-byte FIFO that can lower the traffic on the serial bus interface, and reduce power consumption by allowing the system processor to burst read sensor data and then go into a low-power mode. With its dedicated I2C sensor bus, the MPU-6500 directly accepts inputs from external I2C devices. MPU-6500, with its 6-axis integration, on-chip DMP, and run-time calibration firmware, enables manufacturers to eliminate the costly and complex selection, qualification, and system level integration of discrete devices, guaranteeing optimal motion performance for consumers. MPU-6500 is also designed to interface with multiple non-inertial digital sensors, such as pressure sensors, on its auxiliary I2C port.
Description:
MPU-6500 module (three-axis gyroscope + three-axis acceleration)
Module Model: GY-6500
Use the chip: MPU-6500
Power supply: 3-5v (internal low voltage regulator)
Communication: Standard IIC / SPI communication protocol
Chip built-in 16bit AD converter, 16-bit data output
Gyro range: ±250 500 1000 2000 °/ s
Acceleration range: ±2 ±4 ±8 ±16g
The use of immersion gold PCB, machine welding process to ensure quality
Pin pitch: 2.54mm
Module size: 15mm * 25mm
Applications:
FPV, RC, and Robots systems
GPS navigation systems
Impact recognition and logging
Gaming and virtual reality input devices
Motion-activated functions
Intelligent power saving for handheld devices
Vibration monitoring and compensation
Free-fall detection
We also have a module with the same driver chips but including an extra BMP180(Barometer) driver chip so offering 10 degrees of freedom, Click Here
Package Includes :
1 x GY-6500 MPU9250/6500 Sensor Module
1 x Jumper Header(Unsoldered).
Reviews
There are no reviews yet.