4.3 Inch HMI LCD Module DMG48270C043_04WTC (Commercial Grade)

DWIN 4.3 Inch HMI LCD Module DMG48270C043_04WTC (Commercial Grade)
Features:

Based on self-designed T5L0, 262K Color, 18bit, 480*272,  TV-TN-TFT-LCD;
Capacitive touch screen Optional;
TTL/RS232 Interface,10Pin1.0mm FCC connection wire;
Download via SD card or on-line serial port;
Easy-to-use DWIN DGUS V7.6 GUIs Development, no coding skills required;
Dual Development System: DGUS II/ TA(Instruction set);

Package Includes:
1 x 4.3 inch HMI display screen

Hardware and interface description

LCM interface
FPC40_0.5mm, RGB interface

TP interface
Capacitive touch: COB structure, IIC interface

Resistive touch: 4Pin_1.0mm interface

User interface
10Pin_1.0mm latching socket for power supply and serial communication. Download rate(typical value): 12KByte/s

Flash
16 MBytes NOR Flash, for fonts, pictures and audio files. Rewrite cycle: over 100,000 times

Buzzer
3V passive buzzer. Power: <1W

SD  card interface
FAT32. Download files by SD interface can be displayed in statistics. Download rate: 4Mb/s

PGT05 interface
When product crashes by accident, you can use PGT05 to update DGUS kernel and make the product return to normal

Display Parameters

LCD Type
TV-TN, TFT LCD

Viewing Angle
TV viewing angle, 70°/70°/40°/30° (L/R/U/D)

Resolution
480×272 pixels (0°/90°/180°/270°)

Color
18-bit 6R6G6B

Active Area (A.A.)
95.04mm (W)×53.86mm (H)

Backlight Mode
LED

Backlight Service Life
>20000 hours (Time of the brightness decaying to 50%on the condition of continuous working with the maximum brightness)

Brightness
DMG48270C043_04WTC: 250nit

DMG48270C043_04WTR: 200nit

DMG48270C043_04WN: 300nit

Brightness Control
0~100 grade (When the brightness is adjusted to 1%~30%of the maximum brightness, flickering may occur and is not recommended to use in this range)

Note: You can use dynamic screen saver wallpapers to avoid afterimages caused by fixed page display for a long time.

Touch Parameters

Type
CTP (Capacitive touch panel)

Structure
G+G structure with surface cover of tempered glass

Touch Mode
Support point touch and drag

Surface Hardness
6H

Light Transmittance
Over 90%

Life
Over 1,000,000 times touch

Type
RTP (Resistive touch panel)

Structure
ITO film + ITO glass

Touch Mode
Support point touch and drag

Surface Hardness
3H

Light Transmittance
Over 80%

Life
Over 1,000,000 times touch

Serial Interface Parameters

Mode
UART2: ON=TTL/CMOS; OFF=RS232
UART4: ON=TTL/CMOS; OFF=RS232(Only available after OS configuration)

Voltage Level
Test Condition
Min
Typ
Max
Unit

Output 1, Iout = -4mA
2.7
3.2
–
V

Output 0, Iout = 4mA
–
0.1
0.4
V

Input 1
2.4
3.3
5.5
V

Input 0
0
–
1.0
V

Baud Rate
3150~3225600bps, typical value of 115200bps

Data Format
UART2: N81
UART4: N81/E81/O81/N82 , 4 modes (OS configuration)

Interface Cable
10Pin_1.0mm

Electrical specifications

Rated Power
<5W

Operating Voltage
4.5~5.5V, typical value of 5V

Operating Current
200mA
VCC=5V, max backlight

70mA
VCC=5V, backlight off

Recommended power supply: 5V 1A DC

Operating environment

Operating Temperature
-10℃~60℃ (5V @ 60% RH)

Storage Temperature
-20℃~70℃

Conformal Coating
None

Operating Humidity
10%~90%RH, typical value of 60% RH